SPEEDFIT UFH SINGLE ROOM CONTROL UNIT Underfloor Heating Wet Sytems

Information Search:

Search:

Advanced search

Categories

BHL Discount Range
Bathrooms
Boilers
Boiler Packs
Central Heating Controls
Central Heating Cylinders
Central Heating Pumps
Coal Bunkers
Commercial Plumbing & Disabled Products
Commercial Warm Air
Drainage Products
Electric Panel Heaters
Electric Storage Heaters
Electric Water Heaters
Fan Convectors
Fires and Fireplaces
Fittings & Pipe
Flue Systems
Gas Wall Heaters
Gas Water Heaters
Grit Bins
Kitchen Products
Lead & Accessories
Macerator Pumps
Oil Storage Tanks
Plumbing Consumables
Plumbers Tools
Portable Heating
Radiators
Radiator Valves
Renewable Energy
Sealed Systems Kits
Showering
Towel Warmers
Underfloor Heating
	Underfloor Heating Wet Systems
	Underfloor Heating Wet Sytems - Packs
	Underfloor Heating Electric Systems
	Uponor System 12 Underfloor Heating System
Ventilation Products
Waste Products
Water Storage Tanks
Water Filtration
Water Treatment
New Products

Manufacturers

Alpha Boilers

Aqua Cure

Ariston Heating

Albion Cylinders

Altecnic

More...

SPEEDFIT UFH SINGLE ROOM CONTROL UNIT

SPEEDFIT UFH SINGLE ROOM CONTROL UNIT :: Underfloor Heating Wet Sytems - Packs :: Underfloor Heating :: BHL

JGROOMPACK SINGLE ROOM CONTROL UNIT

John Guest Speedfit reserve the right to change the colour and shape of products. Photographs are for illustration purposes only.

General Description

The new Speedfit Underfloor Heating Control Unit is the ideal way to provide heating to a conservatory or room extension, up to 30m².

The unit is pre-assembled and pre-wired to allow for a fast and simple installation.

The control unit has integral ball valves to allow for isolation from the primary heating system, an adjustable blending valve and a 6 metre head circulation pump. An anti-vibration mounting bracket ensures silent operation.

Speedfit push in connections make for a fast connection to pipework.

Speedfit recommend connection to the main central heating flow and return distribution system, but it is also possible to connect to the nearest radiator supply pipe.

A full and detailed installation guide is provided with each unit.

The Speedfit Underfloor Heating Control Unit is suitable for use when:

The boiler serving the existing heating system has the capacity to take the extra output from 2KW to 3KW
The boiler is compatible with the additional pump.
The single room heating system will only operate when the existing heating is on.
The maximum area to he heated is 30 sq metres.
The Control Unit is designed to be used with Speedfit Barrier Pipe. The amount of pipe needed is determined not only by the size and shape of the room but by the resistance of the floor finish to heat transfer.

The table below shows examples of low resistance (tiles) and high resistance (carpet with underlay) finishes.

COIL SIZE TO AREA

Part
No.
Coil Size
(m)

Staples
Required Max Area
(m²) Temp/Tiles
(°C) Temp/Carpet
(°C) Max Output
(KW)
15BPEX-150C 150 240 20 44 58 1.8
15BPEX-120C 120 200 17 44 58 1.5
15BPEX-100C 100 170 14 44 58 1.2
15BPEX-50C 50 100 7 44 58 0.6